We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Monthly Archives: February 2026
- - February 19, 2026
In our latest dyno test we have this 2025 MG HS 1.5 in for tuning and testing. After a quick installation of our Pro Petrol chip tuning box, it was up on the rollers to see what the engine could achieve.
Dyno testing before and after shows healthy gains across the rev range, with a significant increase in power and torque, really transforming how it feels to drive.
Peak power was increased, as we were able to lift it from 175hp at stock, up to 195hp with the box. If you take a look at the dyno graph below you can see how we change that curve (dotted red and blue lines). We give much more consistency here, lifting every part of the rev range and really opening up in those higher revs, right up to that +20hp extra at its peak.
Torque also saw some impressive improvements. At stock the engine produced 275Nm and now 325Nm with the box. If you take another look at the graph (solid lines), you can really see where we have applied those gains. Again, showing improvements across every part of the
- - February 10, 2026
Here we install our 3 Channel Petrol chip tuning box to this 2024 Ineos Grenadier Fieldmaster.
For those looking to get even more from these awesome SUVs, owners will find tuning limitations due to the locked ECU, with no way to read or write the ECU data. This means that while traditional remapping is impossible, our tuning module offers the perfect solution here, providing fantastic gains without requiring a traditional ECU flash. This has the added benefit of being traceless once removed for warranty purposes.
Performance gains:
POWER 286HP ->->-> 430HP
TORQUE 450Nm ->->-> 630NmAs shown in the installation guide, we will connect to the Map, Boost and Cam Sensors. To gain access to these sensors, you’ll need to remove engine cover.
Chapters in the video below:
0:00 Getting Started
0:01 Remove Engine Cover
0:07 MAP Sensor
0:35 BOOST Sensor
0:58 CAM Sensor
1:22 Secure & Connect
1:42 Replace Engine CoverCheck out the full installation here:
For more information on tuning for your Ineos,
Recent Posts
