Professional On-site Fitting Service
Whilst the DIY aspect of our products is part of the experience for some customers, we appreciate that not everyone may feel comfortable installing the unit themselves.
For the majority of vehicles installation is free of charge at our premises*
Depending on the sensor locations, fittings in general usually take between 10-30 minutes. Our engineers will show you how the unit is installed and where the box is secured after the installation.
We will also demonstrate how to remove the box, how to apply the bypass plug and how to adjust the settings.
With your permission we take photos and/or video of your vehicle and the install process to be used on our social media. All registration numbers will be covered. Please let us know if you are not happy to allow this.
If you would like to have your unit installed by one of our professional engineers please contact us on 0191 385 9005 or email [email protected]
Our opening times are Monday - Friday 9am - 5.30pm
Our address is:
Unit 23A Dubmire Industrial Estate
Tyne and Wear
1.4, 1.5, & 1.6 HDi/TDCi installation
These are the only engines that we currently charge for fitting. Fitting to these engine takes around one hour.
The charge for fitting to these engines is £40. The cost of fitting is non-refundable should you chose to return your unit in accordance with our 28 day money back policy.
Please see the video below which shows the installation process on these engines.
If you are not local to us, we can still help. Most installs are very straightforward and can be performed at home.
We have a large selection of installation videos on our YouTube channel. To view our installation videos please click the following link to visit the Bluespark YouTube channel.