Seat Ateca 2.0 TDI 200PS (2021+) - Bluespark Pro + Boost Diesel SENT Tuning Module
Twin Channel Unit for Maximum Performance
5 User Selectable Maps
10 Level Adjustability Per Map
Our Flagship Unit
Up to 15% Better MPG
The Bluespark Pro fuelling maps are carefully constructed to maintain excellent compatibility with DPF's (Diesel Particulate Filters).
Torque values are carefully considered to ensure compatibility with all gearboxes, including Automatic and Semi-Auto (DSG style) gearboxes.
Power & Torque Gains
Power & Torque Gains
Enjoy increased power from your vehicle throughout the entire rev range.
We design our maps to make power come in sooner, make great torque gains and hold them for as long as possible. Whilst we do make great peak power increases, for most vehicles this is not the primary focus of our tuning. We aim to get the best power possible across the whole rev range to make your vehicle perform best in real world driving conditions.
Our units considerably reduce turbo lag and will make your vehicle easier and more fun to drive.
Your vehicle should make very similar power and torque gains to those quoted, though small variances from vehicle to vehicle, and from dyno to dyno are to be expected.
"Before" figures quoted are based upon manufacturer's stated power output.
This is a Plug and Play unit, with photographic instructions provided for installation and adjustment. Installation and removal on the majority of cars is a breeze and can be completed in minutes.
- Twin Channel - Controls Fuel and Boost Pressure in harmony. Near factory Air/Fuel Ratios and EGTs are manitained throughout the rev range.
- 5 User Selectable Power Curves to suit your requirements, ranging from economy mode to all out performance.
Boost & RPM Detection
Using our unique Boost Sense™ feature combined with Rev Sense™ RPM detection, fuelling accuracy is vastly improved over tuning boxes from other manufacturers.
This accuracy allows our units to make the maximum torque possible whilst remaining 100% DPF friendly.
The Pro+Boost will provide your engine with the maximum level of torque whilst retaining clean emissions and therefore excellent DPF compatibility.
Conventional tuning modules without Boost Sense™ cannot accurately transition between off-boost and on-boost fuelling. This causes black smoke (particulates) to be created when the turbocharger is not producing boost.
Most tuning boxes either allow this to happen, clogging your DPF or reduce the level of fuelling which in turn means that the engine will not make the optimum level of torque.
Excellent Engine Reliability
The Pro+Boost’s Boost Control™ will alter the amount of turbocharger pressure available to the engine to keep AFR’s (air to fuel ratios) relatively consistent. This allows clean combustion; excellent torque and low exhaust gas temperatures (EGTs).
Maintaining low EGTs is useful when running a high level of tune particularly for vehicles that are under heavy loads such as those used for towing. This prevents components from overheating and causing reliability issues.
For Diesel vehicles we expect to see improvements in fuel economy of around 10%. This means if you currently get 50 MPG you might expect to see somewhere around 55 MPG. This is very dependent upon your driving style. If you use the extra power and drive faster naturally the economy benefits will be lessened.
All of our Products are covered by the Bluespark no quibble 28 day money back guarantee as well as a 2 year manufacturers warranty. If you ever experience any problems or have any questions about our products our team are always happy to assist.