The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.Learn more.
The Bluespark fuelling maps are carefully constructed to maintain excellent compatibility with DPF's (Diesel Particulate Filters).
Torque values are carefully considered to ensure compatibility with all gearboxes, including Automatic and Semi-Auto (DSG style) gearboxes.
Click Here to See our PDF Installation Guide
£199.99
Power & Torque Gains
Power & Torque Gains
Enjoy increased power from your vehicle throughout the entire rev range.
We design our maps to make power come in sooner, make great torque gains and hold them for as long as possible. Whilst we do make great peak power increases, for most vehicles this is not the primary focus of our tuning. We aim to get the best power possible across the whole rev range to make your vehicle perform best in real world driving conditions.
Our units considerably reduce turbo lag and will make your vehicle easier and more fun to drive.
Your vehicle should make very similar power and torque gains to those quoted, though small variances from vehicle to vehicle, and from dyno to dyno are to be expected.
"Before" figures quoted are based upon manufacturer's stated power output.
Our Bluespark Pro
tuning box offers great performance for your vehicle. This Diesel chip
uses high speed digital microprocessor technology to deliver the best
power gains possible. It uses dynamic mapping designed around specific
vehicle models to ensure that the fuelling is always correct for your
vehicle.
This model offers higher performance
than the CR Tech 2, while maintaining the ease of installation of a
single channel unit.
Our Bluespark Pro units fill the gap
between conventional 'tuning boxes' and remaps. Bluespark
engineers use data downloaded from the cars ECU to find engine
limitations (preventing component damage) and potential areas for
improvements, similar to re-mapping. This data is then utilized in the
Bluespark Pro units in different ways.
The Bluespark Pro has the ability to
provide huge low down and mid-range torque gains compared to
conventional tuning boxes.
The module comes with 5 user selectable
fuel maps pre-installed for your vehicle, ranging from low down torque
for towing, economy maps and all out performance maps; ensuring that
there will be a fuel map to match your needs and
driving style.
The Bluespark Pro + Boost Control is
also available with additional boost control on most vehicles to
increase turbocharger output providing even bigger power and torque
gains (up to 35%).
This is a Plug and Play
unit, with photographic instructions provided for installation and
adjustment. Installation and removal on the majority of cars is a breeze
and can be completed in minutes.
For Diesel vehicles we expect to see improvements in fuel economy of
around 10%. This means if you currently get 50 MPG you might expect to see
somewhere around 55 MPG. This is very dependent upon your driving style.
If you use the extra power and drive faster naturally the economy benefits
will be lessened.
For Diesel vehicles we expect to see improvements in fuel economy of
around 10%. This means if you currently get 50 MPG you might expect to see
somewhere around 55 MPG. This is very dependent upon your driving style.
If you use the extra power and drive faster naturally the economy benefits
will be lessened.
